|Model||DZ-2018TA Ultrasonic welding machine|
|PApplication||plastic carlights,plastic toys,pp,pvc welding,Electric mosquito swatter welding,Oil drum cover,Meter box,Spots cards welding|
|Delay Time/Weld time/Hold Time||0.01-9.99s|
|Max output power||2000kw|
|packing sizeW*H*D(CM)||Machine Frame：400*650*1100Generater：210*320*80|
|Advantage||Accurate temperature control/Flexible Manufacturing/Low Maintenance Cost/Sustainable/Low Noise Level/High Safety Level/Easy to Operate/Long Service Life/High Rigidity/High-accuracy|
Ultrasonic welding machine is the process of converting electric current into electric energy through ultrasonic generator.
The converted high-frequency electric energy then converted into the mechanical motion of the same frequency again through
the transducer, and the mechanical movement is transmitted to the welding head through a set of horn device which can change the amplitude. The vibration energy received by the welding head is transferred to the joint of the work piece to be welded. In this area, the vibration energy is converted into heat energy by friction, and the plastic is melted. Ultrasonic can be used not only to weld hard thermoplastic plastics, but also to process fabrics and films. Heat energy comes from the reciprocating movement of a work piece on another surface with a certain displacement or amplitude under a certain pressure. Once the expected welding degree is reached, the vibration will stop, and at the same time, there will still be a certain pressure applied to the two work pieces to cool and solidify the just welded parts, thus forming a close combination.
Standard DIZO Ultrasonic welding machineFeatures：
1.Adopted ST chip to ensure the ultrasonic output amplitude stably ;
2.Withstand voltage of transistor is 1600V, with strong performance and low failure rate.
3.The designed bandwidth can reach to 1000H with high environmental fitness;
4.Pneumatic components are adopted the original AIRTAC products which ensures the lower failure rate;
5.All of the operation panel and Rev. stop parts are designed in Minimum 500,000 times, to ensure machine running in long term .